Product Details
The Accucel-8150 is a Lipoly/LiFe battery charging workhorse. Capable of handling up to 8S, 7A or a maximum of 150W charging current plus balancing and discharging packs.
The Accucel-8150 has various programming and charging modes. It will accept and safely charge NiCd,Lilo, Lipo, LiFe, Pb batteries. Bundled with the Accucel-8150 is some of the most common input and output wires which should satisfy most charging requirement.
This charger has a JST-XH (same as Align / Venom / Electrifly etc.) balancer plug, which makes it compatible with our Zippy / Rhino LiPo packs, HXT, Loong Max and many other packs with a JST-XH balancer plug.
Note: the manufacturer didn't include a printed manual with this charger. The charger is very straight forward to use, however I will be happy to email you the full English manual upon request.
Features:
- Microprocessor controlled
- Delta-peak sensitivity (NiMH/NiCd)
- Individual cell balancing
- Li-ion, LiPo and LiFe capable
- Ni-Cd and NiMH capable
- Large range of charge currents
- Store function, allows safe storage current
- Time limit function
- Input voltage monitoring. (Protects car batteries at the field)
- Data storage (Store up to 5 packs in memory)
- Battery break in and cycling.
- External temperature sensor.
Requirement:
- 12~18V 7A+ Power Supply (sold separately)
Warning and Safety:
- Do not charge Li-po batteries with NiHM/NiCAD charger.
- Do not charge battery in wrong mode.
- Do not over discharge Li-po under 3.2V per cell
- Do not overcharge Li-po over 4.20V per cell
- Do not discharge more than the rated discharge rate
- Never charge more than 1C (1 x Capacity of the pack)
- Always charge Li-po with a balance charger.
- Never run Li-po in water, electronic and water don't mix well.
Secured shopping at DFXHobbies. All transactions data are 100% protected by the latest 128Bit SSL technology.
